A4P 3/3 is a synthetic polymer based foam concentrate capable of extinguishing a wide variety of fires, including hydrocarbon and polar solvent fires. The foam that is created is compact and capable of resisting heat, yet it can quickly knock-down fires and create a vapour barrier to prevent re-ignition. It has outstanding vapour suppression qualities, finding its place in HAZMAT applications. At 3%, A4P 3/3 can be used as an AFFF foam on CLASS B hydrocarbon fires. A4P 3/3 has better burnback protection and heat-resistant foam on hydrocarbon fires than regular AFFF foam. Non air aspirating nozzles (fog) as well as low expansion air aspirating nozzles can be used. At 3%, A4P 3/3 is an alcohol resistant foam, used on such polar solvents as acetone,alcohols, ketones, etc., where the polymeric layer of the foam forms an impenetrable barrier against the solvents. Air aspirating low/medium expansion foam nozzles should be used for this kind of application. Use A4P 3/3 between 1% to 3% as a CLASS A foam or between 0.5% to 1% as a wetting agent.

A4P; 3/6 is a synthetic polymer based foam concentrate capable of extinguishing a wide variety of fires, including hydrocarbon and polar solvent fires. The foam that is created is compact and capable of resisting heat, yet it can quickly knock-down fires and create a vapour barrier to prevent re-ignition. It has outstanding vapour suppression qualities. At 3%, A4P 3/6 can be used as an AFFF foam on CLASS B hydrocarbon fires. A4P 3/6 has better burnback protection than regular AFFF foam. Non air aspirating nozzles (fog) as well as low expansion air aspirating nozzles can be used. At 6%, A4P 3/6 is an alcohol resistant foam, used on such polar solvents as acetone,alcohols, ketones, etc., where the polymeric layer of the foam forms an impenetrable barrier against the solvents. Air aspirating low/medium expansion foam nozzles should be used for this kind of application. Use A4P 3/6 between 1% to 3% as a CLASS A foam or between 0.5% to 1% as a wetting agent.

Unifoam AFFF 3 is a synthetic aqueous film forming foam used for Class B hydrocarbon fires where a rapid extinguishment of the fire is a necessity. Unifoam AFFF3 foam releases a film in order to promote extinguishment as well as to secure any vapours. Unifoam AFFF 3 can be used with non air aspirating nozzles (fog) as well as low expansion air aspirating nozzles. AFFF3 is proportioned at 3%. This product can also be used as a wetting agent at 0.5%.

Unifoam AFFF 6 is a synthetic aqueous film forming foam used for Class B hydrocarbon fires where a rapid extinguishment of the fire is a necessity. Unifoam AFFF6 foam releases a film in order to promote extinguishment as well as to secure any vapours. Unifoam AFFF 6 can be used with non air aspirating nozzles (fog) as well as low expansion air-aspirating nozzles. AFFF6 is proportioned at 6%. This product can also be used as a wetting agent at 1.0%.

Unifoam AFFF 6 TR is an AFFF training foam designed to be lower in cost yet still maintain some of the film forming characteristics of AFFF foam. Unifoam AFFF 6 TR has shorter burn-back protection than regular AFFF, thereby allowing for more training sessions. Unifoam AFFF 6 TR can be used with non air aspirating nozzles (fog) as well as low expansion air aspirating nozzles.

Unifoam High Expansion is a synthetic based foam concentrate for use with air aspirating foam generating equipment; from low to high expansion devices. Unifoam High Expansion produces a stable, long lasting blanket of foam with a very high water retention. It can be used from 0.5% TO 6% depending on the application. It is suitable for three-dimensional fires where total flooding of warehouses, tunnels, mines, and hangars are required.

Unifoam Medium Expansion is a synthetic based foam concentrate for use with air aspirating medium expansion foam generating equipment. Unifoam Medium Expansion produces a stable, long lasting blanket of foam with a very high water retention. It can be used from 2% TO 6% depending on the application.

A hydrolized protein solution containing foam stabilizers and freezing point depressants to make it effective as low as minus 13 degrees Celsius. Unifoam Protein Foam produces a highly stable and compact protein foam for low expansion applications such as for controlling and extinguishing hydrocarbon spills, storage tanks fires, etc. Use on CLASS B hydrocarbon type fires with NFPA type II hardware and air aspirating foam nozzle.

A hydrolized protein solution containing foam stabilizers and freezing point depressants to make it effective as low as minus 13 degrees Celsius. Unifoam Protein Foam produces a highly stable and compact protein foam for low expansion applications such as for controlling and extinguishing hydrocarbon spills, storage tanks fires, etc. Use on CLASS B hydrocarbon type fires with NFPA type II hardware and air aspirating foam nozzle.

Unifoam TR 3 is a general purpose training foam for CLASS B hydrocarbon fires. Unifoam TR 3 can be used with non air aspirating nozzles (fog) as well as low expansion air aspirating nozzles.

Unifoam uniA 005 is a synthetic based foam concentrate for CLASS A type of applications such as: wood and paper fires, grass fires, structural fires, etc. This product has wetting properties in order to penetrate deep seated fires and thereby extinguish and inhibit further ignition. Unifoam uniA 005 can be used with non air aspirating nozzles (fog) as well as low expansion air aspirating nozzles and compressed air foam systems (CAFS). As a wetting agent, use at 0.025% to 0.05%.

Unifoam uniA 01 is a synthetic based foam concentrate for CLASS A type of applications such as: wood and paper fires, grass fires, structural fires, etc. This product has wetting properties in order to penetrate deep seated fires and thereby extinguish and inhibit further ignition. Unifoam uniA 01 can be used with non air aspirating nozzles (fog) as well as low expansion air aspirating nozzles and compressed air foam systems (CAFS). As a wetting agent, use between 0.05% and 0.1%.

Unifoam uniA 1 is a synthetic based foam concentrate for CLASS A type of applications such as: wood and paper fires, grass fires, structural fires, etc. This product has wetting properties in order to penetrate deep seated fires and thereby extinguish and inhibit further ignition. Unifoam uniA 1 can be used with non air aspirating nozzles (fog) as well as low expansion air aspirating nozzles and Compressed Air Foam Systems (CAFS). As a wetting agent, use between 0.1% and 0.3%.